Differences

This shows you the differences between two versions of the page.

--- home_automation [2025/08/17 15:39] – w5ged
+++ home_automation [2025/09/15 22:44] (current) – w5ged
@@ Line 16: / Line 16: @@
   * [[https://smlight.tech|SMLight SLZB-06M Ethernet/WiFi PoE Zigbee Adapter]]
   * [[https://ratcloud.llc/|RATGDO]] Garage Door Opener
+  * [[https://www.rheem.com/econet-smart-thermostat|Rheem EcoNet Thermostat]]
+  * [[https://www.plex.tv/|Plex Media Server]]
+  * [[https://shop.tempest.earth/products/tempest|Weatherflow Tempest]]
 The following hardware has been flashed with Tasmota & connected to Home Assistant using MQTT:
@@ Line 34: / Line 37: @@
   * [[https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf|Bosch BME280]]
   * [[https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf|Bosch BMP280]]
+  * [[https://sonoff.tech/en-us|SONOFF]] SNZB-02 ZigBee Indoor Temperature and Humidity Sensor
+  * [[https://us.aqara.com/products/aqara-temperature-and-humidity-sensor|Aqara Zigbee Temperature and Humidity Sensor]]
 Network Infrastructure:
   * [[https://www.lilygo.cc/products/t-beamsupreme-m?variant=43067944173749|LilyGo ESP32-S3 LoRa Development Board with SX1262 868/915MHz GPS U-blox L76K]] - aka: T-BeamSUPREME (M)
   * [[https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit?variant=41433735758022|RAK WisBlock]] - aka: with u-blox ZOE-M8Q, OLED Display & solar enclosure
+Tasmota Rules:
+  * Control a remote switch based upon a local temperature value
+  Rule1
+  ON Tele-DS18B20-1#Temperature>80 do WebSend [IPADDRESS] Power1 1 BREAK
+  ON Tele-DS18B20-1#Temperature<75 do WebSend [IPADDRESS] Power1 0 ENDON